AirGuard Device and App Setup Instructions
Support
Last Update il y a un an
IMPORTANT: REGISTER YOUR ACCOUNT FIRST! SCAN THE QR CODE ON THE BOX TO GET YOUR USERNAME.
1. CHECK YOUR EMAIL
Look for an email from Blynk. It contains your username to access the AirGuard device and a link to create your password. Once set, your account will be ready!
2. DOWNLOAD THE BLYNK APP
Go to the App Store (iOS) or Google Play (Android) and search for Blynk. Download and install the app on your phone or tablet. The Blynk icon looks like this:
3. ADD YOUR DEVICE
Open the Blynk app.
Tap “Add New Device”
Make sure your AirGuard is plugged in and powered on.
4. FIND AND SYNC YOUR DEVICE
Select “Find Devices Nearby.” This may take a minute to sync.
Ensure Bluetooth and Wi-Fi are enabled on your phone.
If the app doesn’t automatically find your AirGuard:
Open your phone’s Wi-Fi settings.
Manually connect to “Blynk AirGuard”
5. CONNECT TO YOUR HOME WI-FI
The app will prompt you to Join Your Wi-Fi Network — tap Join.
Enter your Wi-Fi password when asked.
Note: This is a one-time step unless you reset the device or move it to another network.
6. DEVICE CONFIGURATION
Once connected, your device will configure automatically.
You’ll be prompted to name your device — feel free to personalize it! (You can change the name anytime in the app).
7. ADDING ADDITIONAL DEVICES
Open the main menu in the Blynk app.
Tap the “+” icon in the top-right corner.
Follow the same setup steps.
Note: You will only need to re-enter Wi-Fi details if the new device uses a different network.
Need Extra Help?
Watch our step-by-step video tutorial here: www.youtube.com/watch?v=Z9fXQH-Wo4Y
Important Notes
Your AirGuard connects to your home Wi-Fi. If your Wi-Fi goes offline, the device will not be able to provide real-time updates.
The device receives automatic software updates whenever new mold strains are added to our detection algorithm — no action required!